EQM-400 – Ball Mixer Mill

EQM-400 – Ball Mixer Mill

Its capacity to ground, mix and homogenize quickly small quantities of sample, make of the EQM-400 Mill your great ally in the preparation of samples. This mill has been designed for the final preparation of small quantities of hard, semi-hard and fragile samples – up to 15 g. -. It can prepare two samples simultaneously and reduce them parting from an initial size of 0.8 to 1.5 mm. until sizes of less than 10µ in short periods of time – 1 to 4 minutes.

Category:

Product Description

Due to its effectiveness/time rate, this mill is ideal for the final reduction in the preparation of samples by fusion – using grain sizes of 10µ speeds up the homogeneization of the sample in the flux, noticeably reducing the fusion times -. It is also especially recommended for preparing and mixing samples with binding agents for its subsequent analysis via X Ray fluorescence.

Specifications

Technical description

  • Method: grinding, milling, mixing and homogeneization
  • Applications: hard, semi hard and fragile materials such as coal, coke, glass, slags, minerals, floors, ceramics, silica, blones, plastics, wood, electronic waste, chemical products, tobacco, cereals, etc.
  • Programs: five working programs
  • Speed: 100 a 2000 stirrings/minute
  • Time: 0 to 99 minutes
  • Power: 150W
  • Engine: 220V – 150W
  • Power source: 220V – 100W
  • Accesories: 50ml and 25 ml Milling Jars
  • CW Balls: Ø 10mm / Ø 15mm / Ø 20mm / Ø 25mm
  • Dimensions: 24 cm. (height) x 31.5 cm. (width) x 35 cm. (depth)
  • Approximate weight: 13kg

Downloads